KCP series single stage Plastic pelletizing machine

Your Stable performance and Low energy consumption Solution for Waste Plastics Recycling and Pelletizing system .KCP series are designed with Intergarted Plastic Compactor Recycling Pelletizer system which are combines with the functions of crushing, Cutting ,compacting, plasticization, and Granulating into one Unit, making it a intelligent and efficient recycling solution for various types of plastic waste.

According to the shape The KCP series type plastic granualting machine can handle various soft plastic film, raffias, filaments, bags, woven bags, fabric woven ,such as :PE LDPE HDPE LLDPE PP BOPP ABS EPS XPS PS etc. Machine results in getting dryer pellets and cleanded  ,besides ,It is widely used in the production line for the blown film, tube extrusion, and injection molding application . The machine capacity could be customized accordinly .

The KCP 5G Series Granulator system is the ultimate solution for plastics recycling and granulation. It can provide PLC intelligent controlling & higher output with lower energy consumption, saving you time and cost. See the following features of our KCP  plastic granulating Production line.

1. Belt conveyor for plastic scrap feedingl automatically, Feeding speed adjustable by inverter controller according to the feeding amount.

2. The metal detector is optional to protect the next machine.

1.Compactor installed inverter and servo motor to realize  accurate feeding.

2.Our compact have temperature control system,at the bottom there is water cooling pipe forestall material over cooked ,also  have cooling fan and spray device which will strat when temeprature going too high. 

3 The machine are with fuction of pre-heating ,, mixing ,Half -plasticized and pre-dry size reduction ,in order  to ensure the material could be feed stable and fast .

1. Extruder with closed protection cover

2. Running speed adjustable by inverter

3. Compactor and extruder combined as a integrated unit

4. High efficiency barrel and screw used for extruder with excellent plasticizing result and high output capacity. 

5.Perfect plasticization and lowest loss of material property.

1 Double chamber design,  realizing non-stop operation.   

2 Force double vacuum degassing system to get rid of the low molecular, moisture and printing ink effectively to improve the quality of plastic pellets .

1.Single-board, dual-station design ,with lifting rings to facilitate installation and maintenance. 2.Ceramic heaters are provided on both sides to maintain the temperature of the material.    

3.Equipped with Gefran pressure sensor, when the pressure in front of the network is more than 12 MPa, it will prompt to change the screen.

1. Longer screen lifetime, reducing screen change frequency

2. Easy to use and none-stop type: easy and quick screen change and do not need to stop the running machine.

3. Very low operation cost.

Auto-clean laser filter:

1 The self-cleaning mesh changer is made of double-mesh cemented carbide with less wear and longer service life.

2 This type of screen changer can automatically clean the impurities in the screen plate, reduce the drainage loss.

3 It can regulate the constant waste discharge according to the pressure It can reduce the cost of manual screen changer.

1 Equipped with shock-proof pressure gauge to measure discharge pressure.

2 New European design water ring pelletizer, Cutting speed adjustable by inverter, PLC control speed according to melt pressure automaticlly to get uniform size granules.

1 With heater exchanger at water tank for cooling. Make the water recycling.   

2 Vibration dryer combined with horizontal type centrifugal dryer to get well dried final granules.

The final qualified pellets are stored in the silo ,the drying system could dry the pellets well .

1 Final cleaned and dryer pellets .

2 Could be re-used as raw materials for injection and molding application

1 Adopt famous electrical brands :Such as:Siemens,Schneider,ABB etc

1 One button stop and start the whole system automaticlly .

2 Could provide PLC Intergrated intelligent controlling and HMI.Resulting in more easy operation and less labors cost during .

3 Could provide PLC Intergrated intelligent controlling and HMI.Resulting in more easy operation and less labors cost during .

1 Low energy consumption ,high capactiy .

2 intergarated crushing, compacting and plletizing in one whole line.

3 PLC Controlling whole line ,more easy operation,Labor costs saving .  

4 Machine warranty with suffcient spare parts in stack ,delivery in-time .