KSP series double stage Plastic pelletizing machine

The KSP series single screw extruding and pelletizing system is specialized for rigid plastic scrap. It combines function of raw materials feeding , plasticization ,Granualting and drying.this machine is sutible for the after crushing/Shredding rigid flakes,such as PP PE ABS PS HIPS PC etc. 

The machine made final uniform pellets/Granules could be as the injection molding ,film blowing ,pipe extrusion application . 

1 After Crushing/Shredding raw materials are feed into screw loader , conveyed into the single screw extruder by screw loader .

2 Feeding speed adjustable by inverter controller according to the feeding amount.

3 The raw materials of conveying pipe are stainless steel, the typical capacity are customized .

1 High efficiency barrel and screw used for plastic granulating  with excellent plasticizing result and high output capacity.

2 Extruder with equiped with protection cover ,extryder running speed adjustable by inverter . 

3 Adopt high wear resistant alloy material to ensure 1.5 times service life of normal one .

1 Double chamber design,  realizing non-stop operation.

2 Equipped with vacuum pump and waste water tank .

3 Double vacuum degassing to get rid of the low molecular, moisture and printing ink efficiency to improve the final plastic pellets /ganules quality.

1.Single-board, dual-station design ,with lifting rings to facilitate installation and maintenance. 2.Ceramic heaters are provided on both sides to maintain the temperature of the material.    

3.Equipped with Gefran pressure sensor, when the pressure in front of the network is more than 12 MPa, it will prompt to change the screen.

1Longer screen lifetime, reducing screen change frequency

2Easy to use and none-stop type: easy and quick screen change and do not need to stop the machine 

1 The self-cleaning mesh changer is made of double-mesh cemented carbide with less wear and longer service life.

2This type of screen changer can automatically clean the impurities in the screen plate, reduce the drainage loss.

3It can regulate the constant waste discharge according to the pressure It can reduce the cost of manual screen changer

1 Twin screws are often used to handle plastic materials with high viscosity materials, inks, coatings, adhesives plastic raw materials.

2 The twin-screw granulator has higher granulation efficiency, excellent mixing and plasticizing effects.

3 One of the reasons why twin-screws are most widely used in extrusion and injection molding is that they provide higher product quality.

1Cutter blade materials :D2

2 Equipped with shock-proof pressure gauge to measure discharge pressure.

3 New European design water ring pelletizer, Cutting speed adjustable by inverter, PLC control speed according to melt pressure automatically to get uniform size granules.

1 With heater exchanger at water tank for cooling. Make the water recycling for saving water consumption.   

2 Vibration dryer combined with horizontal type centrifugal dryer to get well dried final granules.

1The final qualified pellets are stored in the silo ,the drying system could dry the pellets well .

2 Provide machine capactiy setting Online monitoring weighing &packaging 

1 Adopt famous electrical brands :Such as:Siemens,Schneider,ABB etc

1 One button stop and start the whole system automaticlly .

2 Could provide PLC Intergrated intelligent controlling and HMI.Resulting in more easy operation and less labors cost during .