1. In 2024, the global total plastic production will be 413.8 million tons, and China's total plastic production will account for 33.3%
In 2024, the global total plastic production will be 413.8 million tons, of which mechanically recycled post-consumer plastic production will account for about 8.7%, reaching 36.5 million tons; chemical recycling will account for only 0.1%. Bio-based and bio-derived plastics account for 0.7%, reaching 3 million tons.

Kitech Machinery will be exhibited at the plastics recycling show europe in RAI Amsterdam, Netherlands. We sincerely invite you to attend the plastics recycling show Europe 2025. As a leading company in the field of plastic recycling field, we will exhibit with the latest products and technical solutions to bring a new manufacturing experience to professionals in the plastics industry.

1. People pay more and more attention to the treatment of waste plastics

Plastics are considered one of the greatest inventions of the 20th century, which greatly facilitates people's production and life. However, a large amount of waste plastics are piled up in landfills or discarded into the environment, posing a serious threat to the natural ecosystem. Traditional treatment methods cannot change the status quo of resource waste and environmental pollution. Therefore, exploring environmentally friendly and economical ways to recycle plastic waste and realizing the transformation of plastic consumption from a disposable economy to a circular carbon economy have become hot spots and problems in the field of plastic recycling.

This week, Kitech Machinery successfully ran a parallel twin screw pelletizing system for PP/PE crushed flakes. This twin-screw pelletizing system is sold to Iran with a processing capacity of 400-500 kg per hour.

The parallel co-rotating twin-screw pelletizing system is an efficient and advanced equipment in the plastic processing industry. Its design principle and structural characteristics give it significant advantages in the material mixing and granulation process. This is a highly efficient and multifunctional plastic processing equipment, suitable for all kinds of plastic modification, which has the following performance characteristics and uses.

1. The output of plastic products is growing rapidly, and the global market demand for recycled plastics has great potential

Plastics are one of the most important materials in the modern chemical industry and are widely used in all areas of life. Plastic manufacturing is energy-intensive and emission-intensive, and greenhouse gases are emitted at every stage of its life cycle. At the same time, the recycling rate of plastics is low, which pollutes the environment.

In recent years, plastic pollution has become a major global concern. A recent study has found that plastic not only exacerbates climate change, ocean acidification, and biodiversity loss, but also has a comprehensive impact on the overall environment of the Earth. This forces us to re-examine the threat of plastic to humans and nature.

Recently, at the eagerly awaited ArabPlast 17th International Trade Show for Plastics, Recycling, Petrochemicals, Packaging, and Rubber Industries, Kitech Machinery was like a rising star, successfully capturing the attention of the global industry with its outstanding performance.

Dear friends, partners, and customers! As the New Year's bells ring, we at Kitech Machinery would like to extend our warmest greetings and best wishes to you all. The past year has been a journey filled with challenges and opportunities, and we are truly grateful for your continued support and trust in our company. We look forward to another year of working together, innovating, and growing with you. May the New Year bring you and your loved ones joy, health, and prosperity. Let's create a better future hand in hand!

This week, Kitech Machinery successfully ran a set of hot melter system to reduce the volume of styrofoam foam. This set of equipment is sold to the Bukovik region of Serbia.This set of equipment can reduce the volume of foam by more than 90%, so that foam can be transformed into hard plastic solids, reducing storage and transportation costs, and facilitating subsequent pelletizing work.

Plastic pellets are widely used as raw materials for manufacturing plastic products. The transportation of plastic pellets in the ocean is usually carried out by freight containers in tons. The leakage of plastic pellets will undoubtedly harm marine life and affect fishing, aquaculture, and tourism activities. The most recent major accident occurred on the coast of Galicia, Spain, where millions of plastic particles accidentally leaked from the ship and were later washed ashore.

This week, Kitech Machinery successfully tested a KSP series single screw pelletizing system for HDPE pipe fragments. This project single screw pelletizing system is sold to Switzerland with a plastic particle production capacity of 300-330 kilograms per hour. The materials recycled and processed by the customer include HDPE pipes, barrels, and so on.

Wandering in the river of time, we once again welcome this moment full of warmth and joy - Kitech Machinery's October to December 2024 employee birthday party. As the autumn wind fades away and winter quietly arrives, the year-end bell rings not far away. This birthday party is like a warm sunshine in winter, warming the hearts of every birthday star and illuminating the path we are walking together.